diff options
Diffstat (limited to 'sys/nixpkgs')
| -rw-r--r-- | sys/nixpkgs/default.nix | 10 | ||||
| -rw-r--r-- | sys/nixpkgs/pkgs/default.nix | 5 | ||||
| -rw-r--r-- | sys/nixpkgs/pkgs/snap-sync-forked/default.nix | 24 | ||||
| -rwxr-xr-x | sys/nixpkgs/pkgs/snap-sync-forked/snap-sync-forked | 529 |
4 files changed, 566 insertions, 2 deletions
diff --git a/sys/nixpkgs/default.nix b/sys/nixpkgs/default.nix index c37d5582..da3a33e6 100644 --- a/sys/nixpkgs/default.nix +++ b/sys/nixpkgs/default.nix @@ -2,11 +2,17 @@ lib, system, overlays ? [], -}: { + sysLib, +}: let + additionalPackages = (import ./pkgs) {inherit sysLib;}; + complete_overlays = overlays ++ additionalPackages; +in { # TODO: inheriting system here is discouraged, localSystem or hostSystem should be inspected - inherit system overlays; + inherit system; + overlays = complete_overlays; config = { # TODO: this fails because of the root tempsize, which should be increased + #contentAddressedByDefault = true; allowUnfreePredicate = pkg: diff --git a/sys/nixpkgs/pkgs/default.nix b/sys/nixpkgs/pkgs/default.nix new file mode 100644 index 00000000..b057068c --- /dev/null +++ b/sys/nixpkgs/pkgs/default.nix @@ -0,0 +1,5 @@ +{sysLib}: let + snap-sync-forked = (import ./snap-sync-forked) {inherit sysLib;}; + overlays = [] ++ snap-sync-forked; +in + overlays diff --git a/sys/nixpkgs/pkgs/snap-sync-forked/default.nix b/sys/nixpkgs/pkgs/snap-sync-forked/default.nix new file mode 100644 index 00000000..55e2bd27 --- /dev/null +++ b/sys/nixpkgs/pkgs/snap-sync-forked/default.nix @@ -0,0 +1,24 @@ +{sysLib}: [ + (self: super: { + snap-sync-forked = sysLib.writeShellScriptWithLibrary { + name = "snap-sync-forked"; + src = ./snap-sync-forked; + dependencies = with self; [ + bash + btrfs-progs + coreutils + gawk + gnugrep + snapper + util-linux + + # optional: + libnotify + openssh + pv + rsync + sudo + ]; + }; + }) +] diff --git a/sys/nixpkgs/pkgs/snap-sync-forked/snap-sync-forked b/sys/nixpkgs/pkgs/snap-sync-forked/snap-sync-forked new file mode 100755 index 00000000..a66f31ae --- /dev/null +++ b/sys/nixpkgs/pkgs/snap-sync-forked/snap-sync-forked @@ -0,0 +1,529 @@ +#!/usr/bin/env bash +# snap-sync +# https://github.com/wesbarnett/snap-sync +# Copyright (C) 2016-2021 Wes Barnett + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., + +# ------------------------------------------------------------------------- + +# Takes snapshots of each snapper configuration. It then sends the snapshot to +# a location on an external drive. After the initial transfer, it does +# incremental snapshots on later calls. It's important not to delete the +# snapshot created on your system since that will be used to determine the +# difference for the next incremental snapshot. + +set -o errtrace + +version="0.7" +name="snap-sync" + +printf "\nsnap-sync version %s, Copyright (C) 2016-2021 Wes Barnett\n" "$version" +printf "snap-sync comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions. See the license for more information. \n\n" + +# The following line is modified by the Makefile or +# find_snapper_config script +SNAPPER_CONFIG=/etc/sysconfig/snapper + +donotify=0 +if ! command -v notify-send &> /dev/null; then + donotify=1 +fi + +doprogress=0 +if ! command -v pv &> /dev/null; then + doprogress=1 +fi + +error() { + printf "==> ERROR: %s\n" "$@" + notify_error 'Error' 'Check journal for more information.' +} >&2 + +die() { + error "$@" + exit 1 +} + +traperror() { + printf "Exited due to error on line %s.\n" "$1" + printf "exit status: %s\n" "$2" + printf "command: %s\n" "$3" + printf "bash line: %s\n" "$4" + printf "function name: %s\n" "$5" + exit 1 +} + +trapkill() { + die "Exited due to user intervention." +} + +trap 'traperror ${LINENO} $? "$BASH_COMMAND" $BASH_LINENO "${FUNCNAME[@]}"' ERR +trap trapkill SIGTERM SIGINT + +usage() { + cat <<EOF +$name $version +Usage: $name [options] + +Options: + -c, --config <config> snapper configuration to backup + -d, --description <desc> snapper description + -h, --help print this message + -n, --noconfirm do not ask for confirmation + -k, --keepold keep old incremental snapshots instead of deleting them + after backup is performed + -p, --port <port> remote port; used with '--remote'. + -q, --quiet do not send notifications; instead print them. + -r, --remote <address> ip address of a remote machine to backup to + --sudo use sudo on the remote machine + -s, --subvolid <subvlid> subvolume id of the mounted BTRFS subvolume to back up to + -u, --UUID <UUID> UUID of the mounted BTRFS subvolume to back up to + +See 'man snap-sync' for more details. +EOF +} + +ssh="" +sudo=0 +while [[ $# -gt 0 ]]; do + key="$1" + case $key in + -d|--description) + description="$2" + shift 2 + ;; + -c|--config) + selected_configs="$2" + shift 2 + ;; + -u|--UUID) + uuid_cmdline="$2" + shift 2 + ;; + -s|--subvolid) + subvolid_cmdline="$2" + shift 2 + ;; + -k|--keepold) + keep="yes" + shift + ;; + -n|--noconfirm) + noconfirm="yes" + shift + ;; + -h|--help) + usage + exit 1 + ;; + -q|--quiet) + donotify=1 + shift + ;; + -r|--remote) + remote=$2 + shift 2 + ;; + -p|--port) + port=$2 + shift 2 + ;; + --sudo) + sudo=1 + shift + ;; + *) + die "Unknown option: '$key'. Run '$name -h' for valid options." + ;; + esac +done + +notify() { + for u in $(users | tr ' ' '\n' | sort -u); do + sudo -u "$u" DISPLAY=:0 \ + DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/$(sudo -u "$u" id -u)/bus" \ + notify-send -a $name "$1" "$2" --icon="dialog-$3" + done +} + +notify_info() { + if [[ $donotify -eq 0 ]]; then + notify "$1" "$2" "information" + else + printf '%s\n' "$1: $2" + fi +} + +notify_error() { + if [[ $donotify -eq 0 ]]; then + notify "$1" "$2" "error" + else + printf '%s\n' "$1: $2" + fi +} + +[[ $EUID -ne 0 ]] && die "Script must be run as root. See '$name -h' for a description of options" +! [[ -f $SNAPPER_CONFIG ]] && die "$SNAPPER_CONFIG does not exist." + +description=${description:-"latest incremental backup"} +uuid_cmdline=${uuid_cmdline:-"none"} +subvolid_cmdline=${subvolid_cmdline:-"5"} +noconfirm=${noconfirm:-"no"} + +if [[ -z $remote ]]; then + if ! command -v rsync &> /dev/null; then + die "--remote specified but rsync command not found" + fi +fi + +if [[ "$uuid_cmdline" != "none" ]]; then + if [[ -z $remote ]]; then + notify_info "Backup started" "Starting backups to $uuid_cmdline subvolid=$subvolid_cmdline..." + else + notify_info "Backup started" "Starting backups to $uuid_cmdline subvolid $subvolid_cmdline at $remote..." + fi +else + if [[ -z $remote ]]; then + notify_info "Backup started" "Starting backups. Use command line menu to select disk." + else + notify_info "Backup started" "Starting backups. Use command line menu to select disk on $remote." + fi +fi + +if [[ -n $remote ]]; then + ssh="ssh $remote" + if [[ -n $port ]]; then + ssh="$ssh -p $port" + fi + if [[ $sudo -eq 1 ]]; then + ssh="$ssh sudo" + fi +fi + +if [[ "$($ssh findmnt -n -v --target / -o FSTYPE)" == "btrfs" ]]; then + EXCLUDE_UUID=$($ssh findmnt -n -v -t btrfs --target / -o UUID) + TARGETS=$($ssh findmnt -n -v -t btrfs -o UUID,TARGET --list | grep -v "$EXCLUDE_UUID" | awk '{print $2}') + UUIDS=$($ssh findmnt -n -v -t btrfs -o UUID,TARGET --list | grep -v "$EXCLUDE_UUID" | awk '{print $1}') +else + TARGETS=$($ssh findmnt -n -v -t btrfs -o TARGET --list) + UUIDS=$($ssh findmnt -n -v -t btrfs -o UUID --list) +fi + +declare -a TARGETS_ARRAY +declare -a UUIDS_ARRAY +declare -a SUBVOLIDS_ARRAY + +i=0 +for x in $TARGETS; do + SUBVOLIDS_ARRAY[$i]=$($ssh btrfs subvolume show "$x" | awk '/Subvolume ID:/ { print $3 }') + TARGETS_ARRAY[$i]=$x + i=$((i+1)) +done + +i=0 +disk=-1 +disk_count=0 +for x in $UUIDS; do + UUIDS_ARRAY[$i]=$x + if [[ "$x" == "$uuid_cmdline" && ${SUBVOLIDS_ARRAY[$((i))]} == "$subvolid_cmdline" ]]; then + disk=$i + disk_count=$((disk_count+1)) + fi + i=$((i+1)) +done + +if [[ "${#UUIDS_ARRAY[$@]}" -eq 0 ]]; then + die "No external btrfs subvolumes found to backup to. Run '$name -h' for more options." +fi + +if [[ "$disk_count" -gt 1 ]]; then + printf "Multiple mount points were found with UUID %s and subvolid %s.\n" "$uuid_cmdline" "$subvolid_cmdline" + disk="-1" +fi + +if [[ "$disk" == -1 ]]; then + if [[ "$disk_count" == 0 && "$uuid_cmdline" != "none" ]]; then + error "A device with UUID $uuid_cmdline and subvolid $subvolid_cmdline was not found to be mounted, or it is not a BTRFS device." + fi + if [[ -z $ssh ]]; then + printf "Select a mounted BTRFS device on your local machine to backup to.\nFor more options, exit and run '%s -h'.\n" "$name" + else + printf "Select a mounted BTRFS device on %s to backup to.\nFor more options, exit and run '%s -h'.\n" "$remote" "$name" + fi + while [[ $disk -lt 0 || $disk -gt $i ]]; do + for x in "${!TARGETS_ARRAY[@]}"; do + printf "%4s) %s (uuid=%s, subvolid=%s)\n" "$((x+1))" "${TARGETS_ARRAY[$x]}" "${UUIDS_ARRAY[$x]}" "${SUBVOLIDS_ARRAY[$x]}" + done + printf "%4s) Exit\n" "0" + read -e -r -p "Enter a number: " disk + if ! [[ $disk == ?(-)+([0-9]) ]] || [[ $disk -lt 0 || $disk -gt $i ]]; then + printf "\nNo disk selected. Select a disk to continue.\n" + disk=-1 + fi + done + if [[ $disk == 0 ]]; then + exit 0 + fi + disk=$((disk-1)) +fi + +selected_subvolid="${SUBVOLIDS_ARRAY[$((disk))]}" +selected_uuid="${UUIDS_ARRAY[$((disk))]}" +selected_mnt="${TARGETS_ARRAY[$((disk))]}" +printf "\nYou selected the disk with uuid=%s, subvolid=%s.\n" "$selected_uuid" "$selected_subvolid" +if [[ -z $ssh ]]; then + printf "The disk is mounted at '%s'.\n" "$selected_mnt" +else + printf "The disk is mounted at '%s:%s'.\n" "$remote" "$selected_mnt" +fi + +# shellcheck source=/etc/default/snapper +source "$SNAPPER_CONFIG" + +if [[ -z $selected_configs ]]; then + printf "\nInteractively cycling through all snapper configurations...\n" +fi +selected_configs=${selected_configs:-$SNAPPER_CONFIGS} + +declare -a BACKUPDIRS_ARRAY +declare -a MYBACKUPDIR_ARRAY +declare -a OLD_NUM_ARRAY +declare -a OLD_SNAP_ARRAY +declare -a NEW_NUM_ARRAY +declare -a NEW_SNAP_ARRAY +declare -a NEW_INFO_ARRAY +declare -a BACKUPLOC_ARRAY +declare -a CONT_BACKUP_ARRAY + +# Initial configuration of where backup directories are +i=0 +for x in $selected_configs; do + + if [[ "$(snapper -c "$x" list --disable-used-space -t single | awk '/'"subvolid=$selected_subvolid, uuid=$selected_uuid"'/ {cnt++} END {print cnt}')" -gt 1 ]]; then + error "More than one snapper entry found with UUID $selected_uuid subvolid $selected_subvolid for configuration $x. Skipping configuration $x." + continue + fi + + if [[ "$(snapper -c "$x" list --disable-used-space -t single | awk '/'$name' backup in progress/ {cnt++} END {print cnt}')" -gt 0 ]]; then + printf "\nNOTE: Previous failed %s backup snapshots found for '%s'.\n" "$name" "$x" + if [[ $noconfirm == "yes" ]]; then + printf "'noconfirm' option passed. Failed backups will not be deleted.\n" + else + read -e -r -p "Delete failed backup snapshot(s)? (These local snapshots from failed backups are not used.) [y/N]? " delete_failed + while [[ -n "$delete_failed" && "$delete_failed" != [Yy]"es" && + "$delete_failed" != [Yy] && "$delete_failed" != [Nn]"o" && + "$delete_failed" != [Nn] ]]; do + read -e -r -p "Delete failed backup snapshot(s)? (These local snapshots from failed backups are not used.) [y/N] " delete_failed + if [[ -n "$delete_failed" && "$delete_failed" != [Yy]"es" && + "$delete_failed" != [Yy] && "$delete_failed" != [Nn]"o" && + "$delete_failed" != [Nn] ]]; then + printf "Select 'y' or 'N'.\n" + fi + done + if [[ "$delete_failed" == [Yy]"es" || "$delete_failed" == [Yy] ]]; then + # explicit split list of snapshots (on whitespace) into multiple arguments + # shellcheck disable=SC2046 + snapper -c "$x" delete $(snapper -c "$x" list --disable-used-space | awk '/'$name' backup in progress/ {print $1}') + fi + fi + fi + + SNAP_SYNC_EXCLUDE=no + + if [[ -f "/etc/snapper/configs/$x" ]]; then + # shellcheck source=/etc/snapper/config-templates/default + source "/etc/snapper/configs/$x" + else + die "Selected snapper configuration $x does not exist." + fi + + if [[ $SNAP_SYNC_EXCLUDE == "yes" ]]; then + continue + fi + + printf "\n" + + old_num=$(snapper -c "$x" list --disable-used-space -t single | awk '/'"subvolid=$selected_subvolid, uuid=$selected_uuid"'/ {print $1}') + old_snap=$SUBVOLUME/.snapshots/$old_num/snapshot + + OLD_NUM_ARRAY[$i]=$old_num + OLD_SNAP_ARRAY[$i]=$old_snap + + if [[ -z "$old_num" ]]; then + printf "No backups have been performed for '%s' on this disk.\n" "$x" + read -e -r -p "Enter name of subvolume to store backups, relative to $selected_mnt (to be created if not existing): " mybackupdir + printf "This will be the initial backup for snapper configuration '%s' to this disk. This could take awhile.\n" "$x" + BACKUPDIR="$selected_mnt/$mybackupdir" + $ssh test -d "$BACKUPDIR" || $ssh btrfs subvolume create "$BACKUPDIR" + else + mybackupdir=$(snapper -c "$x" list --disable-used-space -t single | awk -F"|" '/'"subvolid=$selected_subvolid, uuid=$selected_uuid"'/ {print $5}' | awk -F "," '/backupdir/ {print $1}' | awk -F"=" '{print $2}') + BACKUPDIR="$selected_mnt/$mybackupdir" + $ssh test -d "$BACKUPDIR" || die "%s is not a directory on %s.\n" "$BACKUPDIR" "$selected_uuid" + fi + BACKUPDIRS_ARRAY[$i]="$BACKUPDIR" + MYBACKUPDIR_ARRAY[$i]="$mybackupdir" + + printf "Creating new local snapshot for '%s' configuration...\n" "$x" + new_num=$(snapper -c "$x" create --print-number -d "$name backup in progress") + new_snap=$SUBVOLUME/.snapshots/$new_num/snapshot + new_info=$SUBVOLUME/.snapshots/$new_num/info.xml + sync + backup_location=$BACKUPDIR/$x/$new_num/ + if [[ -z $ssh ]]; then + printf "Will backup %s to %s\n" "$new_snap" "$backup_location/snapshot" + else + printf "Will backup %s to %s\n" "$new_snap" "$remote":"$backup_location/snapshot" + fi + + if ($ssh test -d "$backup_location/snapshot") ; then + printf "WARNING: Backup directory '%s' already exists. This configuration will be skipped!\n" "$backup_location/snapshot" + printf "Move or delete destination directory and try backup again.\n" + fi + + NEW_NUM_ARRAY[$i]="$new_num" + NEW_SNAP_ARRAY[$i]="$new_snap" + NEW_INFO_ARRAY[$i]="$new_info" + BACKUPLOC_ARRAY[$i]="$backup_location" + + cont_backup="K" + CONT_BACKUP_ARRAY[$i]="yes" + if [[ $noconfirm == "yes" ]]; then + cont_backup="yes" + else + while [[ -n "$cont_backup" && "$cont_backup" != [Yy]"es" && + "$cont_backup" != [Yy] && "$cont_backup" != [Nn]"o" && + "$cont_backup" != [Nn] ]]; do + read -e -r -p "Proceed with backup of '$x' configuration [Y/n]? " cont_backup + if [[ -n "$cont_backup" && "$cont_backup" != [Yy]"es" && + "$cont_backup" != [Yy] && "$cont_backup" != [Nn]"o" && + "$cont_backup" != [Nn] ]]; then + printf "Select 'Y' or 'n'.\n" + fi + done + fi + + if [[ "$cont_backup" != [Yy]"es" && "$cont_backup" != [Yy] && -n "$cont_backup" ]]; then + CONT_BACKUP_ARRAY[$i]="no" + printf "Not backing up '%s' configuration.\n" "$x" + snapper -c "$x" delete "$new_num" + fi + + i=$((i+1)) + +done + +# Actual backing up +printf "\nPerforming backups...\n" +i=-1 +for x in $selected_configs; do + + i=$((i+1)) + + SNAP_SYNC_EXCLUDE=no + + if [[ -f "/etc/snapper/configs/$x" ]]; then + # shellcheck source=/etc/snapper/config-templates/default + source "/etc/snapper/configs/$x" + else + die "Selected snapper configuration $x does not exist." + fi + + cont_backup=${CONT_BACKUP_ARRAY[$i]} + if [[ $cont_backup == "no" || $SNAP_SYNC_EXCLUDE == "yes" ]]; then + notify_info "Backup in progress" "NOTE: Skipping $x configuration." + continue + fi + + notify_info "Backup in progress" "Backing up $x configuration." + + printf "\n" + + old_num="${OLD_NUM_ARRAY[$i]}" + old_snap="${OLD_SNAP_ARRAY[$i]}" + BACKUPDIR="${BACKUPDIRS_ARRAY[$i]}" + mybackupdir="${MYBACKUPDIR_ARRAY[$i]}" + new_num="${NEW_NUM_ARRAY[$i]}" + new_snap="${NEW_SNAP_ARRAY[$i]}" + new_info="${NEW_INFO_ARRAY[$i]}" + backup_location="${BACKUPLOC_ARRAY[$i]}" + + if ($ssh test -d "$backup_location/snapshot") ; then + printf "ERROR: Backup directory '%s' already exists. Skipping backup of this configuration!\n" "$backup_location/snapshot" + continue + fi + + $ssh mkdir -p "$backup_location" + + if [[ -z "$old_num" ]]; then + printf "Sending first snapshot for '%s' configuration...\n" "$x" + if [[ $doprogress -eq 0 ]]; then + btrfs send "$new_snap" | pv | $ssh btrfs receive "$backup_location" &>/dev/null + else + btrfs send "$new_snap" | $ssh btrfs receive "$backup_location" &>/dev/null + fi + else + + printf "Sending incremental snapshot for '%s' configuration...\n" "$x" + # Sends the difference between the new snapshot and old snapshot to the + # backup location. Using the -c flag instead of -p tells it that there + # is an identical subvolume to the old snapshot at the receiving + # location where it can get its data. This helps speed up the transfer. + + if [[ $doprogress -eq 0 ]]; then + btrfs send -c "$old_snap" "$new_snap" | pv | $ssh btrfs receive "$backup_location" + else + btrfs send -c "$old_snap" "$new_snap" | $ssh btrfs receive "$backup_location" + fi + + if [[ $keep == "yes" ]]; then + printf "Modifying data for old local snapshot for '%s' configuration...\n" "$x" + snapper -v -c "$x" modify -d "old snap-sync snapshot (you may remove)" -u "backupdir=,subvolid=,uuid=" -c "number" "$old_num" + else + printf "Deleting old snapshot for %s...\n" "$x" + snapper -c "$x" delete "$old_num" + fi + + fi + + if [[ -z $remote ]]; then + cp "$new_info" "$backup_location" + else + if [[ -z $port ]]; then + rsync -avzq "$new_info" "$remote":"$backup_location" + else + rsync -avzqe "ssh -p $port" "$new_info" "$remote":"$backup_location" + fi + fi + + # It's important not to change this userdata in the snapshots, since that's how + # we find the previous one. + + userdata="backupdir=$mybackupdir, subvolid=$selected_subvolid, uuid=$selected_uuid" + + # Tag new snapshot as the latest + printf "Tagging local snapshot as latest backup for '%s' configuration...\n" "$x" + snapper -v -c "$x" modify -d "$description" -u "$userdata" "$new_num" + + printf "Backup complete for '%s' configuration.\n" "$x" + +done + +printf "\nDone!\n" + +if [[ "$uuid_cmdline" != "none" ]]; then + notify_info "Finished" "Backups to $uuid_cmdline complete!" +else + notify_info "Finished" "Backups complete!" +fi |